• 1320 North Milford Road, Highland MI 48357
  • Visit us on Facebook
  • Visit us on Twitter

WOOD CHIPPERS

CHIPPER 12" VERMEER BC1000XL

Where to find CHIPPER 12  VERMEER BC1000XL in Highland

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: VERMEER
Model: BC1000XL
3 Hour: $240.00
Daily: $340.00
5 Day: $1,020.00
Weekly: $1,360.00
Comments:
  • General Dimensions and Weights
  • Length - Feed Table Up, Tongue In 150 " 381 cm
  • Length - Table Down, Tongue Extended 198 " 502.9 cm
  • Width 66.5 " 168.9 cm
  • Height 101 " 256.5 cm
  • Weight - Engine Option One 4680 lbs 2122.8 kg
  • Tongue Weight - Engine Option One 520 lbs 235.9 kg
  • Sound Power 119 dB
  • Engine Option One
  • Make and Model PSI 3.0L EFI
  • Number of Cylinders 4
  • Gross Horsepower (Maximum) 89 hp 66.4 kw
  • Torque (Max) 142 ft-lb 192.5 Nm
  • Fuel Tank Capacity 20 gal 75.7 L
  • Max Fuel Consumption 7.8 gph 29.5 lph
  • Fuel Type Unleaded and E10 gasoline
  • Air Cleaner 2-stage dry with safety element
  • Oil Filter Spin-on
  • Recommended Oil SAE 10W30
  • Oil Volume with Filter 4.5 qt 4.3 L
  • Maximum Angle of Continuous Operation 20 deg
  • Cooling Medium Liquid
  • Coolant Capacity (Engine and Radiator) 3.6 gal 13.6 L
  • Alternator 70
  • Fan 16.5" (41.9 cm) pusher
  • Clutch Type Clutchless PTO
  • Clutch Drive Engagement Belt tensioner
  • Feed System
  • Feed Roller Orientation Horizontal
  • Number of Feed Rollers 1
  • Feed Roller Clamp Load 350 lbs 158.8 kg
  • Feed Roller Minimum Distance to Drum 1 " 2.5 cm
  • Feed Roller Dimension 20 " x 17 " (50.8 cm x 43.2 cm)
  • Number of Knives 2
  • Weight of Feed Roller 400 lbs 181.4 kg
  • Number of Feed Roller Motors 1
  • Motor Displacement 28.3
  • Motor Manufacturer White
  • Feed Speed 118 ft/min
  • Infeed Table Width 52 " 132.1 cm
  • Infeed Table Length 32 " 81.3 cm
  • Infeed Hopper Height 12 " 30.5 cm
  • Infeed Throat Capacity 12 " x 17 " (30.5 cm x 43.2 cm)
  • Pinch Point - Distance to End of Feed Table 66.5 " 168.9 cm
  • Distance from Feed Table to Ground 26 " 66 cm
  • Infeed Table Material Thickness .2 " .5 cm
  • Safety System
  • Bottom Feed Stop Bar Standard
  • Bottom Feed Stop Bar Diameter 2 " 5.1 cm
  • Bottom Feed Stop Bar Material Thickness 11 GA
  • Actuation Force (BFSB) 34 lbs 15.4 kg
  • Normal Sensitivity 22 deg
  • Reduced Sensitivity 12 deg
  • Reset Method Green hold-to-run button
  • Four Position Feed Control Bar Standard
  • Positions 4: E-stop, forward, neutral, and reverse
  • Actuation Force 34 lbs 15.4 kg
  • Green Hold to Run Button Standard
  • Drum/Disc Cutting System
  • Material Capacity 12 " 30.5 cm
  • Thickness 20 " 50.8 cm
  • Diameter 20 " 50.8 cm
  • Speed 2220 rpm
  • Weight With Shaft 460 lbs 208.7 kg
  • Safety Lock - Number of Positions 2
  • Number of Knives 2
  • Knife Thickness .6 " 1.6 cm
  • Material A8 chipper steel
  • Useable Edges 2
  • Knife Size 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm)
  • Number of Bolts/Knife 4
  • Replaceable Threaded Knife Block Yes
  • Number of Paddles 5
  • Fixture Method Weld-on
  • Air Flow 580 cfm
  • Bedknife Size 3.5 " x 17.3 " (8.9 cm x 43.8 cm)
  • Bedknife Thickness 1 " 2.5 cm
  • Bedknife Material 1018
  • Bedknife - Number of Useable Edges 4
  • Cutter Drive Components - Engine Option One
  • Number of Bearings 2
  • Bore 2.4 " 6.1 cm
  • Type Spherical rollers
  • Manufacturer Linkbelt
  • Dynamic Capacity 31400 lbs 14242.8 kg
  • Static Capacity 53500 lbs 24267.2 kg
  • Belt Idler/Tensioner Yes
  • Belt Type 5V
  • Discharge System
  • Chute Height 101 " 256.5 cm
  • Chute Rotation Angle 270 deg
  • Rotation Type Manual rotate with pin lock
  • Rotational Lock Yes
  • Hydraulic System
  • Tank capacity 7 gal 26.5 L
  • Recommended Oil Type Vermeer VMF
  • System Type Open center
  • Filtration Method 10 micron return; 100 micron suction
  • Pump Flow at Maximum RPM 3 gpm 11.4 L/min
  • System relief pressure 2500 psi 172.4 bar
  • Flow Control No
  • Directional Control Yes
  • Oil Cooler No
  • Electrical System
  • System Voltage 12 volt
  • Battery Group 24; 580 CCA
  • Standard Gauges Fuel and MFD
  • Deluxe Gauges Standard
  • Switches Droop, EcoIdle, and Sensitivity
  • Controller Vermeer ACS
  • Display In countries that drive on the left side of the road versus the right side of the road, moving these controls over to the left side moves the operator off of the traffic side of the road.
  • Shutdown System High temp, low pressure
  • Radio Remote Control No
  • Chassis
  • Frame Description 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness
  • Tongue Description 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm)
  • Tongue Extension Extendable 24" (61 cm) at 12" (30.5 cm) increments
  • Hitch Type Pintle
  • Fender Description Bolt-on steel
  • Axle/Suspension Torsion
  • Type - Option One Rubber torsional
  • Manufacturer - Option One Dexter
  • Capacity - Option One 5200 lb (2358.7 kg)
  • Tires - Option One ST235/80/R16 Load Range E
  • Wheels - Option One 16 " x 6 " (40.6 cm x 15.2 cm)
  • Axle/Suspension - Option Two Torsion
  • Type - Option Two Rubber torsional
  • Manufacturer - Option Two Dexter
  • Capacity - Option Two 7000 lb (3175.2 kg)
  • Tires - Option Two ST235/80R16 Load Range E
  • Wheels - Option Two 16 " x 6 " (40.6 cm x 15.2 cm)
  • Brake Type Standard electric or optional hydraulic
  • Trailer Light Type LED
  • PINTLE HITCH
Add of the above items to my quote request
for a period of   3 hour(s)   day(s)   5 day(s)   week(s)  




* Please note our minimum rental is a 3-hour rental. Our daily rate is for a 10-hour rental.
* For monthly rates please call 248-889-7368.

* Please call us with any questions about our chipper 12 inch vermeer bc1000xl rentals in Highland MI and surrounding cities in Central & Southeast Michigan.