• 1320 North Milford Road, Highland MI 48357
  • Visit us on Facebook
  • Visit us on Twitter

WOOD CHIPPERS

CHIPPER- 7" Vermeer BC700

Where to find CHIPPER- 7  Vermeer BC700 in Highland

Image for reference only
Actual item may look different
Click on image for larger view

Manufacturer: VERMEER
Model: BC700XL
3 Hour: $150.00
Daily: $200.00
5 Day: $600.00
Weekly: $800.00
Comments:
  • Length - Feed Table Up, Tongue In 113 " 287 cm
  • Length - Table Down, Tongue Extended 133 " 337.8 cm
  • Width 71 " 180.3 cm
  • Height 102 " 259.1 cm
  • Weight - Engine Option One 1800 lbs 816.5 kg
  • Tongue Weight - Engine Option One 180 lbs 81.6 kg
  • Engine
  • Make and Model Kohler ECH740
  • Gross Horsepower (Maximum) 25 hp 18.6 kw
  • Torque (Max) 41.7 ft-lb 56.5 Nm
  • Fuel Tank Capacity 6 gal 22.7 L
  • Max Fuel Consumption 2.4 gph 9.1 lph
  • Fuel Type Gasoline
  • Air Cleaner Kohler HD 2-Stage Dry
  • Oil Filter Spin-on
  • Recommended Oil Kohler oil or API CH4/SJ
  • Oil Volume with Filter 2 qt 1.9 L
  • Maximum Angle of Continuous Operation 25 deg
  • Cooling Medium Oil/Air
  • Alternator 20A Charging
  • Clutch Type Centrifugal PTO
  • Clutch Drive Engagement Centrifugal
  • Feed System
  • Feed Roller Orientation Horizontal
  • Feed Roller Clamp Load 525 lbs 238.1 kg
  • Feed Roller Clamp Type Spring/Feed Roller Weight
  • Feed Roller Minimum Distance to Drum 4 " 10.2 cm
  • Feed Roller Dimension 10
  • Weight of Feed Roller 100 lbs 45.4 kg
  • Motor Displacement 14.2
  • Motor Manufacturer White Hydraulics
  • Feed Speed 49.4 ft/min
  • Infeed Table Width 41.2 " 104.6 cm
  • Infeed Table Length 30.2 " 76.7 cm
  • Infeed Hopper Height 22.1 " 56.1 cm
  • Infeed Throat Capacity 6" x 8"
  • Pinch Point - Distance to End of Feed Table 65.4 " 166.1 cm
  • Distance from Feed Table to Ground 28.1 " 71.4 cm
  • Safety System
  • Bottom Feed Stop Bar Standard
  • Bottom Feed Stop Bar Diameter 2 " 5.1 cm
  • Bottom Feed Stop Bar Material Thickness .12
  • Reset Method Dual green hold-to-run buttons
  • Four Position Feed Control Bar Standard
  • Diameter 2 " 5.1 cm
  • Material Thickness .1 " .3 cm
  • Positions Four position: (E-Stop), Forward, Stop, (Reverse)
  • Green Hold to Run Button Standard
  • Drum/Disc Cutting System
  • Material Capacity 6 " 15.2 cm
  • Width 8 " 20.3 cm
  • Thickness 1.3 " 3.2 cm
  • Diameter 23.9 " 60.7 cm
  • Speed 1748
  • Weight With Shaft 176 lbs 79.8 kg
  • Knife Thickness .6 " 1.6 cm
  • Material A8 Chipper Steel
  • Replaceable Threaded Knife Block Yes
  • Fixture Method Welded
  • Air Flow 5000 cfm
  • Bedknife Size 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert
  • Bedknife Material ASTM A572 Grade 50
  • Cutter Drive Components - Engine Option One
  • Bore 1.5 " 3.8 cm
  • Type Flange-mounted ball type, self-aligning
  • Manufacturer Linkbelt
  • Dynamic Capacity 5640 lbs 2558.3 kg
  • Static Capacity 4460 lbs 2023 kg
  • Belt Idler/Tensioner Spring-loaded adjustable Idler
  • Belt Type 2-band 5-V profile Aramid
  • Discharge System
  • Chute Height 97.2 " 246.8 cm
  • Bottom Thickness .1 " .3 cm
  • Top Thickness .1 " .3 cm
  • Side Wall Thickness .1 " .3 cm
  • Deflector Thickness .1 " .2 cm
  • Chute Rotation Angle 240 deg
  • Rotation Type Manual
  • Rotational Lock Standard Latch
  • Hydraulic System
  • Tank capacity 6.8 gal 25.7 L
  • Recommended Oil Type Vermeer VMF Gold
  • System Type Open center
  • Filtration Method Return flow filtration, 10 micron
  • Pump Flow at Maximum RPM 3.8 gpm 14.4 L/min
  • System relief pressure 2500 psi 172.4 bar
  • Electrical System
  • System Voltage 12 Volt
  • Battery Group 26, 400 CCA
  • Standard Gauges Hour meter
  • Switches Hold-to-run, sensitivity selector
  • Controller Vermeer ACS CB02
  • Chassis
  • Frame Description 3/16"/(.5 cm) ASTM A1011 steel
  • Hitch Type 2"/(5.1 cm) ball coupler
  • Fender Description .1"/(.3 cm) Steel bolt-on
  • Axle/Suspension 2000 lb/(907.2 kg) rubber torsion axle
  • Type - Option One Rubber Torsional
  • Manufacturer - Option One Dexter
  • Capacity - Option One 2000 lb/(907.2 kg)
  • Tires - Option One ST185/80D13 load range D
  • Wheels - Option One 13 x 5, bolt circle 5 on 4.5
  • Axle/Suspension - Option Two 2000lb/(907.2 kg) rubber torsion axle with electric brakes
  • Type - Option Two Rubber torsional, braked
  • Manufacturer - Option Two Dexter
  • Capacity - Option Two 2000 lb/(907.2 kg)
  • Brake Type Electric optional
  • Trailer Light Type LED
  • Other Options
  • Special Paint Available, Optional
  • Extended Warranty Available, Optional
  • Preventive Maintenance Available, Optional
  • 2" BALL
Add of the above items to my quote request
for a period of   3 hour(s)   day(s)   5 day(s)   week(s)  




* Please note our minimum rental is a 3-hour rental. Our daily rate is for a 10-hour rental.
* For monthly rates please call 248-889-7368.

* Please call us with any questions about our chipper 7 inch vermeer bc700 rentals in Highland MI and surrounding cities in Central & Southeast Michigan.