PUMPS

4" 460V3PHASE SUBMERSIBLE PUMP

Where to find 4 460V3PHASE SUBMERSIBLE PUMP in Highland

Image for reference only
Actual item may look different
Click on image for larger view

Where to find 4 460V3PHASE SUBMERSIBLE PUMP in Highland

Click on above thumbnails for alternate view

Manufacturer: WACKER

Model: PS4-5503

Daily: $175.00

Weekly: $525.00

Quantity: for a period of  
day(s)   week(s)  

Additional Information

  • THIS PUMP IS A WACKER PS4-4503.
  • WHICH IS THE SAME AS A TSURUMI KTZ45.5
  • Model Number: PS4 5503
  • Manufacturer Number: 9144
  • Power Type: Electric
  • Horsepower HP: 7.5 hp
  • Pump Inlet Size: 4 in
  • Max Discharge Gal / Min: 428 GPM
  • Weight: 146 lbs
  • ****REQUIRES A THREE PHASE 460 VOLT GENERATOR.****
  • (70 KW TOWABLE DIESEL GENERATOR FROM K&K)
  • VACUUM GAUGE TEST PROCEDURE
  • To check the operating performance of water pumps:
  • Place a garden hose in the discharge port of the water pump. Turn water on and allow water to run while performing this test.
  • When the pump housing is full of water, start the engine and verify the engine rpms are correct. With engine running and pump housing full of water, place vacuum gauge over suction port of pump and run for a minimum of one minute to allow vacuum pressure to develop.
  • For most pumps, the gauge should read a minimum of 15lbs. for satisfactory performance. If less than 15lbs vacuum, your pump may need maintenance.
  • NOTE: It requires one pound of vacuum to pull water up one foot; 20lbs vacuum will pull water up 20ft. Remember, poor suction hose connections can affect the performance of the pump. (IE: Defective O-rings, pinholes in suction hose and loose connections)
* Please note our minimum rental is a 3-hour rental. Our daily rate is for a 10-hour rental.
* For monthly rates please call 248-889-7368.

* Please call us with any questions about our 4 inch 460v3phase submersible pump rentals in Highland MI and surrounding cities in Central & Southeast Michigan.